| iglidur® G, sleeve bearing with flange, mm |
 |
- The all-round classic with an excellent price/performance ratio
- High wear resistance
- Resistance to dust and dirt
- Cost-effective
|
| iglidur® J, sleeve bearing with flange, mm |
 |
- The versatile endurance runner, highly resistant to wear on (nearly) all shafts with very low coefficients of friction
- Low wear against different shaft materials
- Low coefficients of friction in dry operation
- Vibration-dampening
|
| iglidur® A350, sleeve bearing with flange, mm |
|
- Completely lubrication-free belt guiding
- Low drive power
- The endurance runner at higher temperatures in the food sector
- Tight deflection radii
- Compliant with EU regulation 10/2011
- Long service life of the belt
- FDA-compliant
- Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
- For use with temperatures up to +180 °C
|
| iglidur® M250, sleeve bearing with flange, mm |
 |
- Tough all-round material
- Excellent vibration dampening
- Resistant to edge loads
- High impact resistance
|
| iglidur® X, sleeve bearing with flange, mm |
|
- The chemical and temperature specialist, up to 150 MPa static
- Temperature resistant from -100 °C to +250 °C in continuous operation
- Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
- Universal chemical resistance
- High compressive strength
|
| iglidur® W300, sleeve bearing with flange, mm |
 |
- The classic endurance runner, very wear resistant on (virtually) all shafts
- For especially long service life
- Low coefficient of friction
- Extremely high wear resistance
|
| iglidur® SG03, flanged sleeve bearing and felt seal, mm |
|
- Clean bearings even with dirt and dust, thanks to felt seal
- In laboratory tests, a service life up to 50 times higher was achieved.
- Most popular iglidur material worldwide
- High wear resistance
|
| iglidur® GLW, sleeve bearing with flange, mm |
 |
- Cost-effective material for mass production
- Applications with static loads
- Cost-effective
- Dirt-resistant
- Resistant to vibrations
- Lubrication and maintenance-free
|
| iglidur® J260, sleeve bearing with flange, mm |
 |
- Ideal for plastic shafts
- Very good c. o. f. for low or medium loads
- Good liquid media resistance
- Slightly higher temperature rating than iglidur® J
|
| iglidur® W360, sleeve bearing with flange, mm |
 |
- General purpose endurance runner
- Extremely wear-resistant
- Continuous use up to +180°C
- Suitable for wet environments
|
| iglidur® J3, sleeve bearing with flange, mm |
 |
- The new endurance runner: specialist for pulsating loads
- Low coefficients of friction
- Good liquid media resistance
- Low humidity absorption
|
| iglidur® J350, sleeve bearing with flange, mm |
|
- Endurance runner with high dimensional stability at high temperatures - Can be used with many kind of shafts and loads
- Excellent coefficient of friction against steel
- Fulfils the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
- Continuous service temperature up to +180 °C
- For medium to high loads
|
| iglidur® R, sleeve bearing with flange, mm |
 |
- Low-cost material, low wear
- Good abrasion resistance
- Low coefficients of friction in dry operation
- Cost-effective
|
| iglidur® L250, sleeve bearing with flange, mm |
 |
- For high speeds
- Specially made for fast rotating applications
- Very low coefficients of friction
- Excellent wear resistance
|
| iglidur® V400, sleeve bearing with flange, mm |
 |
- For soft shafts, up to +200 °C
- Excellent wear resistance with soft shaft materials and for temperatures up to +200 °C
- Good resistance to chemicals
- High elasticity
|
